Steel Astm A105 Round Bar Hot Rolled Round Sae 1020 Carbon Steel Bar
Steel Bar is divided into three types: hot rolled, forged and cold drawn.Hot-rolled bar steel is 5 to 250 mm, of which 5 to 9 mm is commonly used as a raw material for drawing steel wires,which is called wire;Forged bar steel has a large diameter and is used as a shaft blank;Cold-drawn bar steel has a diameter of 3 to 100mm and has high dimensional accuracy. Steel bar is mostly used as a semi-finished raw material for various deep-processed steels, and has a wide range of uses.
|Length:||1000mm-12000mm Straightness: 3mm/M max(optional)|
|Process:||Forged from vacuum degassed ingots.|
|Delivery condition:||Hot forged Rough machined (black surface after Q/T) Turned (optional)|
|Delivery Time:||25 days|
|Heat treatment:||Normalized / Annealed / Quenched / tempered (optional)|
|Technical Data:||According to the customer's requirement of Chemical Composition, Physical Properties and Mechanical Testing|
|Properties:||As your request|
|Test:||Ultrasonic test according to SEP 1921-84 Class C/c and D/d (optional)|
|Marking:||Grade, heat NO. length will be stamped one each bar with required color|
|Payment:||30% advance by TT, Balance pay before the shipment against shipping documents or irrevocable LC at sight|
Steel round bar category,grades,sizes and standard :
|Carbon structure steel||Q195, Q215, Q235, Q275||16-250mm||GB/T700-2006|
|Low alloy high strength structure steel||Q295, Q345, Q390, Q420,Q460||16-250mm||GB/T1591-2008|
|Prime Carbon structure steel||
10#, 20#, 35#, 45#, 60#, 20Mn,65Mn,
B2, B3, JM20, SH45,S45C, C45
|Alloy structure steel||
|Spring Steel||65Mn, 60Si2Mn, 50CrVA||16-250mm||GB/T1222-84|
|Bearing Steel||GCr15, GCr15GD,55SiMoV||16-250mm||GB/T18254-2002|
|Structural steels subject to end-quench hardenability requirements||20CrMnTi,30CrMnTi,20Cr,40Cr,30CrMo, 42CrMoA,27SiMn,40Mn2H,20CrNiMo,
|Oil wells structural steel||37Mn5, 36Mn2V||16-250mm||Q/LYS248-2007|
|Marine anchor chain steel||CM490, CM690, M30Mn2||16-250mm||YB/T66-1987 GB/T18669-2002|
Q: What is your time of making a sample
A: Usually we will take 1~3 days to make the sample
Q: What is your MOQ?
A: Usually 20 feet containers ( 25 tons) for section steel
Q: What is your delivery time?
A: For stocks, we can send the goods to loading port within 7 days after receiving your deposit
For production period, it usually needs about 15days- 30 days after receiving the deposit
Q: What is your service?
A: We will try our best to satisfy your per request.
We prepare to provide the pre-sales serves, service during sales and afer-sales service for coustomes by the way of advance service, value added service and personalized service.
Q: What is your payment terms?
A: Usually 30% deposit by TT in advance and balance against copy of BL or LC at sight
|Contact Person :||Ms. Kelly Zhang|
|Tel :||+86 15824687445|