Astm A662 Grade C Steel Plate A662 Hot Rolled Steel Sheet Astm A662 high strength steel plate
Astm A662 specification covers three grades, Grades A, B, and C, of carbon-manganese-silicon steel plates intended primarily for service in welded pressure vessels where improved low temperature notch toughness is important. The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements. The steel shall be killed and the plates shall undergo heat treatment. Tensile properties such as tensile strength, yield strength and elongation shall be determined by subjecting the steel plates to a tension test.
Steel Sheet,Sheet Steel,
A662 Steel Sheet,Steel Sheet A662,
Steel Plate A662,A662 Steel Plate,
Carbon steel plate A662,
A662 hot rolled/cold rolled steel sheet,
or as customer required
|Length||2m,2.44m,3m,5.8m,6m,or as customer required|
Standard Export Seaworthy Package.
Suit for all kinds of transport,or as required
ASTM A662 Grade CChemical Composition Max (%)
|A662 Grade C||0,24||0.13-0.55||0.92-1.72||0,035||0,035|
ASTM A662 Grade CMechanical Property
|A662 Grade C||mm||Min Mpa||Mpa||Min %|
It is widely used in petroleum industry, chemical industry, power station, boiler and other industries. It is used to make equipment and components such as reactor, heat exchanger, separator, spherical tank, oil and gas tank, liquefied gas tank, nuclear reactor pressure shell, boiler drum, liquefied petroleum gas bottle, high pressure water pipe of hydropower station, turbine volute and so on.
|Contact Person :||Ms. Kelly Zhang|
|Tel :||+86 15824687445|