Fire damaged steel building
The brief was to reclad the fire damaged steel building. The estates office for Nottingham university had a barn that had been fire damaged after a stack of hay and straw caught fire. The building was reduced to two bays with just the columns and trusses remaining for the other two bays.
The idea was to reinstate the building with the same specification. This included a fibre cement roof, timber purlin and sheeting rails and side cladding in steel corrugated sheets with timber boarding on the front and a new gutter front and back.
The purpose of steel structure building:
it is also steel structure, but it can be used in many ways, such as factory, warehouse, office building, gymnasium, hangar, etc. it is not only suitable for single-layer large-span construction industry, but also can be used to build multi-storey or high-rise buildings; The construction is simple and convenient, the construction period is short, all the components are prefabricated in the factory, and the site only needs simple assembly, which greatly shortens the construction period; Durable, easy to repair, steel construction can resist harsh weather, and only need simple maintenance; The lines of steel structure building are simple and fluent, with a modern sense. There are a variety of colors for the color wall to choose from, and the wall can also use other materials, so it is more flexible; The steel structure building has the advantages of light weight, low foundation cost, fast construction speed, and can be completed and put into operation as soon as possible. The comprehensive economic benefit is much better than that of the concrete structure building.
Brief introduction of steel structure building:
Steel structure building is a kind of building with load-bearing structure made of building steel. Generally, beams, columns and trusses made of section steel and steel plates constitute load-bearing structures. Together with the roof, floor, wall and other enclosure structures, it forms a whole plant building.
Construction section steel usually refers to hot rolled angle steel, channel steel, I-beam, H-beam and steel pipe. The building with load-bearing structure composed of its components is called steel structure building. In addition, L-shaped, U-shaped, Z-shaped and tube shaped thin-walled steel formed by cold rolling of thin steel sheet, edge rolling or no edge rolling, as well as load-bearing structure buildings formed by small steel members such as angle steel and steel bar, are generally called light steel structure buildings. There are also suspension structure buildings with steel cables, which are also steel structure buildings.
The steel has high strength and elastic modulus, uniform material, good plasticity and toughness, high accuracy, convenient installation, high industrialization and fast construction
Advantages of steel structure building:
1. Greatly save construction time, construction is not affected by season
2. Increase the use area of residential space, reduce construction waste and environmental pollution
3. Building materials can be reused to promote the development of other new building materials industry
4. Good anti-seismic performance, easy to transform, flexible and convenient in use, bring comfort to people and so on
5. High strength, light weight, high safety margin of components, reducing building cost
6. In line with the national sustainable development strategy, low-carbon, green, environmental protection and energy saving are the key industries supported by the state
Almost all of Pre-engineered long-span steel structure frame building is customized. Our engineer design it according to local wind speed, rain load, size of this steel structure warehouse ( length*width*height) and does it have other special accessories, like crane, roof fans, skylight panel, etc.? Or we following your drawings.
|No.||Item||VISTA Details of steel structure building or steel frame|
|1||Material||Material||carbon structural steel|
|2||Produce||Lead time||Normally 45 days after the down payment, also according to quantity.|
|3||Quality||Certification||Quality certificate from the factory, the third party by client request.|
|4||Dimensions||Length||H beam: 4000-15000mm|
|5||Thickness:||web plate: 6-32mm|
|6||wing plate: 6-40mm|
|8||Color||According to customers|
|9||Size||MOQ is 1000 m2, width * length * eave height,|
|10||Main components||Base||Cement and steel foundation bolts|
|11||Mainframe||H Steel Beam, Q235 Q345 steel H beam and columns, painted or galvanized, box steel, galvanized C section or steel pipe|
|12||Secondary frame :||galvanized C or Z purlin, steel bracing, tie bar, knee brace, flashing, etc.|
|13||Material||Q235B, Q345B or others as buyers' requests, like ASTM, BSEN, DIN, IPE, AISI, JIS,|
|14||Purlin||C or Z purlin: Size from C120~C320, Z100~Z20|
|15||Column||X-type, tree type, lattice, Cross, Box, etc.|
|16||Bolt||Plain bolt and High-strength bolt|
|17||Roof & wall||PU sandwich panel, Rockwool sandwich panel or corrugated steel sheet|
|18||Canopy||steel sheet, PU sandwich panel, Rockwool sandwich panel|
|19||Door||Sliding or rolling door|
|20||Window||Aluminum alloy window|
|21||Surface||Two lays of rust-proof painting or Hot Dip Galvanized|
|22||Sheet||0.5mm or 0.6mm galvanized sheet|
|23||Accessories||Semi-transparent skylight belts, Ventilators, downpipe, Galvanized gutter, Trim, flashing, etc|
|24||Finishing options||A vast array of colors and textures available, Alkyd painting, two primary paintings, two finish painting (gray paint, red paint, white paint, epoxy zinc, etc.). Or Galvanized.|
|Contact Person :||Ms. Kelly Zhang|
|Tel :||+86 15824687445|