High Precision Cold Rolled 12Cr2Mo High-Pressure Alloy Carbon Seamless Steel Pipe For Chemical Fertilizer
This steel pipe is ascribed to the chemical fertilizer equipment for conveying high temperature and high pressure solutions. It is often used the particular chemical equipment with the running temperature of -40℃ to 400℃ and with the significant pressure of 10 Ma to 30Ma. JST seamless steel tube for chemical fertilizer equipment is created out of high-quality carbon structural steel and alloy steel. We adopt hot rolling and cold drawing manufacturing secrets to produce this kind of steel pipe.
Delivery Status A complete seamless steel tube for chemical fertilizer equipment in these status:
For 20# and 16Mn grades of steel pipes, we deliver them in normalizing state.
For 12CrMo grade of pipes, we deliver them in normalizing state (900℃ to 930℃) and tempering state (670℃ to 720℃). The soaking time or period of time of periodic furnace is a few hours while continuous furnace is just 1 hour.
For 12Cr2Mo grade of seamless steel tubes, we deliver them in normalizing state (900℃ to 960℃) and tempering state (700℃ to 750℃). The soaking time is higher one 60 minute block.
1. Allowable Dimension Deviation
| Types of Steel Tubes | Outer Diameter | Wall Thickness | ||
| Cold-Rolled Tubes | Tube Sizes (mm) | Tolerances (mm) | Tube Sizes (mm) | Tolerances (mm) |
| ＞30-50 | ± 0.3 | ≤ 30 | ± 10％ | |
| ＞50-219 | ± 0.8％ | |||
| Hot-Rolled Tubes | ＞219 | ± 1.0％ | ＞ 20 | ± 10％ |
2. Chemical Composition of Steel Tube for Chemical Fertilizer Equipment Parameters
C :0.08-0.15
Si:0.17-0.37
Mn:0.40-0.70
Other allowance:
S(max) :0.035
P(max) :0.035
Cr:0.40-0.70
Ni(max) :0.030
Cu(max) :0.030
Mo:0.40-0.55
3. Mechanical Properties of Steel Pipe
| Grade | Tensile Strength (Mpa) | Yield Point (Mpa) | Min. Elongation (%) |
| 10 | 335-490 | 205 | 24 |
| 20 | 410-550 | 245 | 24 |
| 16Mn | 490-670 | 320 | 21 |
| 15MnV | 510-690 | 350 | 19 |
| 12CrMo | 410-560 | 205 | 21 |
