P295gh Steel Plate P295gh Hot Rolled Steel Sheet P295gh Hot Rolled Steel Plates
P295gh is ideal for use in elevated working temperatures, grade P295GH is used in the fabrication of industrial pressure vessels and boilers. It is an EN10028 specified grade which governs steels used in pressurised service. It is a normalized steel and has excellent welding characteristics.
|
Type
|
Boiler and Pressure Vessel Steel
|
|
Delivery status
|
AR/TMCP/N/T/N+T/Q+T
|
|
Surface treatment
|
Coating, cleaning, sandblasting and painting according to order requirements
|
|
Application
|
Boiler and Pressure Vessel Equipment
|
|
Thickness
|
3㎜-700㎜
|
|
Width
|
Below 4000mm
|
|
Length
|
Below18000mm
|
P295GH Chemical Composition
| Grade | The Element Max (%) | ||||||
| C | Si | Mn | P | S | Al(min) | N | |
| P295GH | 0.08-0.20 | 0.40 | 0.80-1.50 | 0.025 | 0.015 | 0.020 | 0.012 |
| Cr | Cu | Mo | Nb | Ni | Ti | V | |
| 0.30 | 0.30 | 0.08 | 0.020 | 0.30 | 0.03 | 0.02 | |
P295GH Mechanical Property
| Grade | Thickness | Yield | Tensilmie | Elongation | Impact Energy(KV J) min | ||
| P295GH | mm | Min Mpa | Mpa | Min % | -20° | 0° | +20° |
| ≤ 16 | 295 | 460-580 | 21 | 27 | 34 | 40 | |
| 16> to ≤40 | 290 | 460-580 | 21 | 27 | 34 | 40 | |
| 40> to ≤60 | 285 | 460-580 | 21 | 27 | 34 | 40 | |
| 60> to ≤100 | 260 | 460-580 | 21 | 27 | 34 | 40 | |
| 100> to ≤150 | 235 | 440-570 | 21 | 27 | 34 | 40 | |
| 150> to ≤250 | 220 | 430-570 | 21 | 27 | 34 | 40 | |
Boiler container steel plates are widely used in petroleum, chemical, power station, boiler and other industries. Used in the manufacture of reactors, heat exchangers, spherical tanks, turbine shells for hydropower plants, etc.
Our services
we can cut the large steel plates by your requirements, but to the width and length your demand; we can make the surface of the cut steel plate to be bright by miling and grinding, also can make holes and make angle degrees,and can weld by your drawing.For the thickness under 30mm, we mainly cut by laser cutting;for thickness over 30mm, mainly OXY-cut, flame cutting.for the thickness 200mm steel plate, because during the flame cutting, the temperature is very high, so the cutting parts steel plate might be broken at the angle part, then our workers will repair the angles to be good condition.
