12crmo9-10 Steel Plate 12crmo9-10 Hot Rolled Steel Sheet 12crmo9-10 Hot Rolled Steel Plates
|
Thickness:
|
as your request
|
||
|
Technique:
|
Hot Rolled / Cold Rolled
|
||
|
Width:
|
600-3500mm
|
||
|
Length:
|
as your request
|
||
|
MOQ:
|
1 ton
|
||
|
Supply Ability:
|
5000 tons / month
|
||
|
Payment Terms:
|
T/T(30% as deposit) or L/C
|
||
|
Price Terms:
|
FOB,CFR,CIF
|
||
EN 1.7375 (12CrMo9-10) Chromium-Molybdenum Steel EN 1.7375 steel is an alloy steel formulated for primary forming into wrought products. Cited properties are appropriate for the normalized and tempered condition. 1.7375 is the EN numeric designation for this material.
12CrMo9-10 Chemical Composition Max (%)
| Grade | C | Si | Mn | P | S | Al(min) | N |
| 12CrMo9-10 | 0.10-0.15 | 0.30 | 0.3-0.80 | 0.015 | 0.010 | 0.01-0.040 | 0.012 |
| Cr | Cu | Mo | Nb | Ni | Ti | V | |
| 2.0-2.5 | 0.25 | 0.9-1.10 | 0.30 |
12CrMo9-10 Mechanical Property
| Grade | Thickness | Yield | Tensilmie | Elongation | Impact Energy(KV J) min | ||
| 12CrMo9-10 | mm | Min Mpa | Mpa | Min % | -20° | 0° | +20° |
| ≤ 250 | 355 | 540-690 | 18 | 27 | 40 | 70 | |
Gnee steel mainly provides steel plate, steel sheet, steel pipe,seamless steel pipe and tube, round bars and steel section, and doing steel products processing service: steel plate and sheet processing service. The processing works concludes cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing, also make galvanizing processing or surface painting on the final processed parts; steel pipe hollow bar cutting and lathe processing to make the outer diameter and wall thickness to meet customers requirement, also make heat treatment for hollow bars and pipes. Gnee steel has large stocks for the carbon steel and low alloy steel plates and sheets, especially have the thick plate and heavy plates on stock, also can provide the special material and large size steel plates, boiler and pressure vessel steel plate, marine steel plate, hot rolled steel plate for new production.
Q: Do you have large amount of steel products in stock?
A: Yes , we have a large-scale indoor warehouse with perennial spot stocks totally above 5000 tons.
Q: How long is the delivery time?
A: Generally it is within 10 days. If the goods is not in stock , according to the quantity it is within 30 days.
Q: Do you provide the samples? Free or Extra?
A: The cost of the samples is according to the value.The cost of the freight is necessary.
Q: How to order?
A: Buyer sends the enquery --> Buyer gets the quotation --> Order confirmation --> Buyer send the deposit --> Seller prepares goods --> Seller makes the strict inspection --> Buyer Arranges Balance Payment --> packing and delivery
