304 Stainless Steel Plate ASTM 304 Mirror Stainless Steel Sheet Ss Steel Sheet
0.3mm-6mm(Cold rolled) 3mm-16mm(Hot rolled)
50mm~2000mm or customized
1000mm~8000mm or customized
JIS, AISI, ASTM, GB, DIN, EN
NO.1, 2B, BA, NO.4, 8K, HL, SD
Industry, Food industry
Able to attain tempers from 1⁄4 through full hard, extra full hard by cold rolling.
Withstands severe forming in annealed
Kitchen sinks, Automotive wheel
covers. Toaster springs, Seat belt
Highest machinability rating among the 300 series. Forming and welding are not recommended.
Nuts and bolts, threaded rods,
Excellent corrosion resistance and suitable for deep drawing applications when Nickel content is increased. Carbon content .08%
Food Industry, Chemical Industry,
Deep drawing applications, Aesthetic
Same characteristics as 304 with a lower carbon content .03% max. Used when post weld annealing is impossible. The lower carbon
content reduces carbide precipitation in the welded zone.
Large fabricated equipment.
Molybdenum bearing alloy with better
overall corrosion resistance than 304 and higher creep strength at elevated temperatures.
Marine coastal environments, Pulp
and paper industry, Chemical and
Same characteristics as 316 with a lower Carbon content .03 max. Good corros
ion resistance in high temperature intermittent
service. Used when post weld annealing is impossible. The lower carbon content reduces Carbide precipitation in the welded zone.
Large fabricated equipment.
Higher Molybdenum content than 316 for better corrosion resistance. Carbon content .03% max.
Corrosive environments. Chemical
and petrochemical industries.
Heat resisting alloy with good corrosion resistance. High tensile and creep strengths as well as at elevated temperatures. 309S
has a lower Carbon content.03 max.
Furnace parts, Baffles, Cement kiln
chains. Exhaust manifold butterfly
Improved characteristics over 309 and
better scaling resistance in intermittent
elevated temperatures. Grade 310 has a low co-efficient of expansion.
Furnace parts, Carburizing boxes,
Heat exchangers, Oil burner parts.
Finished by heat treatment , picking or equipvalent cold rolling , followed by skin pass to obtain adequate luster surface
with bright and smooth surface ,easy for further grinding to obtain brighter surface ,suitable for medical instruments ,milk
bright heat treatment after cold rolling
structual members .etc.kitchen utensil ,cutlery ,eleltric applicances ,medical instruments ,building decorations ,etc.
polished with No.150-240 abrasives
milky food processing equipment , medicalinstruments ,building decorations
finshed by polishing with abrasives of suitable grain size to obtain continuous streaks
building decorations ,such as elevators ,escalators ,door.etc
A mirror-like reflective surface ,which is obtained by polishing with successively finer abrasives and buffing extensively with all gritlines are removed
buliding entrances,bulkding column casting ,elevator's wall * doors ,counters,sculptures
|Tel :||+86 15824687445|