ASTM A36 Steel Round Bar Steel Round Bar
A36 steel is a carbon structural steel specification for hot rolled bars, rods and rounds to be used in a variety of applications.A36 carbon steel is readily easy to source.Hot Roll Steel Round Bar/Rod A36 is normally is used for structural and industrial applications. A36 offers good strength, high durability, heavy weight, easy weldability, and low cost. It can be supplied as A36 steel round bar provided by length, or packaged into wire rod. A36 carbon steel round bar can be supplied as hot rolled, cold drawn, rough turned or turned and polished. By cold drawing A36 steel, it will improve the size tolerances and enhance the surface. A36 carbon steel in wire rod is often produced in a 4,000 # package, & used for similar types of applications as bar lengths.
| Size | 12-260mm |
| Length | 6m,9m,12m |
| Material | 20#,45# |
| Technique | Hot Rolled |
Specifications of Round Bar
| Small Size |
12mm,14mm,16mm,18mm,20mm,22mm,25mm,28mm,30mm,32mm,35mm,36mm 38mm,40mm,42mm,45mm |
| Middle Size | 48mm,50mm,52mm,55mm,60mm,65mm,70mm,75mm,80mm,85mm |
| Big Size |
100mm,105mm,110mm,120mm,130mm,140mm,150mm,160mm,170mm 180mm,190mm,200mm |
| Carbon Steel | C | Cu | Fe | Mn | P | Si | S |
| A36 | 0.25 - 0.290 % | 0.20 % | 98.0 % | 1.03 % | 0.040 % | 0.280 % | 0.050 % |
Mechanical Properties of Carbon Steel A36 Bars
| Yield Point ksi, min | 36 |
| Tensile Strength ksi | 58-80 |
| % Elong. 2” Bend | 23 |
Gnee is a raw material production and processing (casting and forging) factory. We are majored in special steel production such as forged round bar, square bar, shaft bar. The forged products reaches 5,500 tons/month. we are the largest domestic forged round bar production company. With the largest export volume of forged round bar in China and a complete set of casting and forging equipment, we can provide follow-up services such as roughing, finishing and heat treatment; More than 70% of the products are exported to the United States, Britain, Germany, South Korea, Singapore, Indonesia, Turkey, Slovakia, Taiwan, Italy, India and other countries and regions.
FAQ
Q:What is the qualification of your company?
A:Our company was established in 2008 accumualting lots of high quality resources and good word-of-mouth.We were officially awarded "class A Management Enterprise"
Q:What is your advantages and core competence?
A: We owed one heat treatment center,capable provide best solutions(including high yensile products) according to clients' demands.We aim at providing the best solutions, not only the products but also the best service.
Q:What is conventional shipping ?
A:container or bulk.
Q:Do you have english Mill Test Certificates?
A:Yes that is what we give gurantee to our clients.
Q:Do you accept the third party inspection ?
A:Yes absolutely we accept.
