Cold Rolled Steel Prices, Cold Rolled Steel Coil Price, SPCC Cold Rolled Steel Coil Sheet
We offer different modes of transport depending on the customer's destination: rail transport and ship transport.The Shipping Mark shall consist of: Trade mark, Seller's name, Product name, Applicable standards, Specifications, Package No., Contract No., Heat No., Weight of zinc film, Color, Production date, Weighing method, Net weight, Gross Weight, Consignee and Protection symbols, etc.
Product Advantages
1.The cold-rolled coil products are accurate in size, uniform in thickness, and the thickness difference of the coils generally does not exceed 0.01-0.03 mm or less, which can meet the requirements of high-precision tolerances.
2.It is possible to obtain extremely thin strips that cannot be produced by hot rolling (up to 0.001 mm or less).
3.The surface quality of cold-rolled products is superior, there are no defects such as pitting, hot-pressed iron oxide, etc.,which are often found in hot-rolled coils, and coils of different surface roughness (glossy or hemp) can be produced according to user requirements. Rough surface, etc., to facilitate the processing of the next process.
4.The cold rolled plate has a good mechanical properties and process properties (such as higher strength, lower yield limit, good deep drawability, etc.).
5.High-speed rolling and full-continuous rolling can be realized with high productivity.
|
Grade
|
RCL(Mpa)
|
RM(MPa)
|
A80mm(%)
|
R90
|
N90
|
|
DC01
|
140~280
|
270~410
|
≥28
|
|
|
|
DC02
|
140~240
|
270~370
|
≥34
|
≥1.4
|
|
|
DC03
|
120~210
|
270~350
|
≥38
|
≥1.8
|
≥0.18
|
|
DC04
|
120~180
|
270~330
|
≥40
|
≥2.0
|
≥0.20
|
|
SPCC
|
130~300
|
270~410
|
|
|
|
|
SPCD
|
120~240
|
270~370
|
|
≥1.3
|
|
|
SPCE
|
120~210
|
270~350
|
|
≥1.8
|
Our Services
Cut large coils into small coils. For steel coils, we can cut one large steel coil into small steel coils for loading at seaport; because for container shipping, each container usually loads weight can not be over 26 tons, but each large coil is usually about 28 tons, so one large coils has to be cut into small coils, and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner, each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils.
Open flat coils into steel plate. For final application, need open flat the coils and cut the coils into steel plate, so we open flat the coils and cut the coils to steel plate to the sizes as required. For saving cost for loading by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to cut to length 2440mm and 5800mm, width usually be 1220mm and 1500mm.after cutting the steel coils into steel plate, we can do black paints on the surface of the plate to make the plate to be anti-rust.
Guide For Ordering Products
A user need provide the following information while placing order
01.Product designation (steel plates or strips)
02.Product standard number
03.Steel grade
04.Product specification and size accuracy (incl. thickness, width and length)
05.Edge status
06.Surface quality level
07.Flatness accuracy
08.Type, coating weight and surface treatment in case of coated products
09.Surface structure in case of hot dip galvanized products
10.Weight
11.Packing method
12.Application
13.Other special requirements
