Electrical Coating Silicon Steel Coil 1050mm Cold Rolled Punching 0.2mm
B50AR350 magnetic flux density is not less than the peak B50 T% stacking factor of not less than: 96 inorganic coating D has good heat resistance and weldability A semi-organic thin coating to improve the punching resistance, and good weldability and a half thick organic H coating punching good interlaminar high resistance chrome-free coating K coating does not contain hexavalent chromium, it has good weldability.
Thickness Available | 0.15-0.85mm |
Width Available | less than 1500mm |
Inside Diameter | 508mm+-10 |
Coating Available | T4, H4, K, L, Z, V |
Width Tolerence | less than 2mm |
Flatness | less than 2% |
Edge Camber within 2m | less than 1.5mm |
Features
1. Low core loss
2. High Permeability
3. Small difference in size
4. Sjit for punching and cutting
5. Good adhesiveness